Should you run an eGPU with the Surface Laptop Studio? You can, but not without some headaches

Surface Laptop Studio Egpu Razer Core
Surface Laptop Studio Egpu Razer Core (Image credit: Daniel Rubino / Windows Central)

One of the cool things about having a lot of technology lying around is trying new setups that push extremes. With Surface Laptop Studio and two Thunderbolt 4 ports, the question of using an external GPU (eGPU) now becomes relevant.

The good news is it technically works, but the bad news is you could also run into issues, especially if you overcomplicate things. None of this applies to Surface Pro 8 (which I'll be doing a separate article on later), but here is what you need to know for now.

Razer Cortex X plus RTX 3080 GPU is wild

The first thing I re-learned about an eGPU is that 40Gbps is a lot, but it does have a ceiling. The ideal setup, which also makes the most sense, is to run an external display from the eGPU. Many people know that if you just run the eGPU without an external display, it needs to send the data back and forth to the Surface Laptop Studio, which reduces performance even more.

Source: Windows Central (Image credit: Source: Windows Central)

On the old Razer Core from 2016, you get four USB Type-A ports and an Ethernet. Its age notwithstanding, the Razer Core is tiny, and I like those ports. I tossed an RTX 2080Ti in it, and it worked. But the 500W power supply (375W GPU max power) was not enough to handle a wired mouse, keyboard, microphone, and webcam, some of which had RGB lighting. The result was some stuttering and the OS dropping and reconnecting some of the accessories.

I then swapped it out for the Razer Core X ($400). That has a 650W power supply (500W for GPU), and it could fit my RTX 3080, which was nice. It's also tremendously girthy at more than twice the width of Raze Core (232mm vs. 105mm) and weighs 14.2lbs (6.48kg) without the GPU installed. It's a chonky boi.

The downside with Razer Core X is it has no external ports, which I needed for my accessories.

Enter Kensington's new SD5750T Thunderbolt 4 Surface dock, which is simply delightful — I'll be reviewing this soon as well. I plugged it into the second Thunderbolt 4 port on Surface Laptop Studio, and suddenly I could plug in all my accessories while the Razer Core X handled the GPU and display output.

(Razer also sells the Core X Chroma ($500), which, yes, adds RGB lights, but also brings back those four Type-A ports, Ethernet, and bumps the PSU to 700W.)

Source: Daniel Rubino / Windows Central (Image credit: Source: Daniel Rubino / Windows Central)

This setup with an eGPU and TB4 dock worked well enough for our recent podcast. It's fast, too, as even with a quad-core CPU, that 3080 makes it a powerful rig.

The issues I had were just minor bugs when I disconnected and reconnected. I've had this problem before with laptops that already have an NVIDIA GPU on board, which is that sometimes the eGPU and the OS get a bit confused loading and unloading drivers.

The point is: For the most part, the setup was working, until my Laptop Studio's internal RTX A2000 GPU got the dreaded exclamation point (!) under Device Manager. I attempted to uninstall and reinstall those drivers, but that is where the real problem began.

Losing all graphics

Upon rebooting to install the NVIDIA display driver, the Surface Laptop Studio effectively blanked out after the Surface logo loaded. I tried a few recovery attempts but opted not to bother with command-line fixes because I had other things to do.

I ended up using a recovery USB and reinstalled Windows 11. Twice.

You see, I tried to do this setup again this morning to see if it was a fluke, and it was not.

Now, is it because I was running a Thunderbolt 4 dock and an eGPU? I don't know. As I said, there were a lot of moving parts here. I'm unsure why Surface Laptop Studio didn't default to the Intel Iris Xe GPU, either.

Of course, I could have micro-managed the GPUs through NVIDIA Control Panel, but to me, this defeats the purpose.

Is an eGPU and Surface Laptop Studio practical?

Source: Daniel Rubino / Windows Central (Image credit: Source: Daniel Rubino / Windows Central)

The bigger question I have is: Who is even going to try this wild setup? If you bought the Surface Laptop Studio with an RTX 3050 Ti, do you need an eGPU? I mean, sure, it's nice, but it doesn't seem very practical.

You're going to drop $400 on the Razor Core X and at least $1,000 (in today's prices) for an RTX 3070 just to make the upgrade worth it. And may your wallets be deep if you want an RTX 3080 or 3090, which push in the $2,000 to $3,000 ranges due to high demand.

Toss in another $350 if you want an excellent Thunderbolt 4 dock in the event you care about adding wired accessories, too.

Some advanced math also needs to be done as eGPUs can shave off around 20% of performance on that GPU. So an RTX 3070 behaves more like a 3060. You also need to factor in the Surface Laptop Studio's quad-core chip versus a proper desktop one. While Surface Laptop Studio earned 11,265 on 3DMark's Time Spy with an RTX 3080 eGPU, that same RTX 3080, when paired in the HP OMEN 30L and a Core i9-10900K, earned a whopping 16,470.

Source: Harish Jonnalagadda / Windows Central (Image credit: Source: Harish Jonnalagadda / Windows Central)

I don't see this as a sensible use of resources, but that's me.

Now, Surface Pro 8 is different, and so far, it's working quite well (but I need to do much more testing). I think an eGPU case for Surface Pro 8 makes much more sense since that device only has Intel Iris Xe. Even adding a 1080 Ti or something in the 20xx series would be a huge performance bump. I'll be doing a separate article on that, including my setup and experience.

I will say, the Kensington dock, so far, is the "keep it simple, stupid" approach. One cable and everything has been working beautifully on Surface Pro 8 and Surface Laptop Studio. I think for most people using this kind of dock, it's the setup most will go for, and for good reasons: It's much cheaper, easier, and works every time. I can see myself using this as my daily desktop driver, and I plan to do just that.

As far as an eGPU, for me, they still fall into that category of it's so cool!, but very few people get one. A strong argument is made for just getting a darn gaming desktop for $1,400 to $3,500 (depending on the high-end GPU you get). You score more ports, a larger PSU, better thermals, and it's just more straightforward.

What about you? Do you plan on going the route of eGPU, Thunderbolt dock, or risk everything and go for both?

Daniel Rubino
Editor-in-chief

Daniel Rubino is the Editor-in-chief of Windows Central. He is also the head reviewer, podcast co-host, and analyst. He has been covering Microsoft since 2007, when this site was called WMExperts (and later Windows Phone Central). His interests include Windows, laptops, next-gen computing, and watches. He has been reviewing laptops since 2015 and is particularly fond of 2-in-1 convertibles, ARM processors, new form factors, and thin-and-light PCs. Before all this tech stuff, he worked on a Ph.D. in linguistics, watched people sleep (for medical purposes!), and ran the projectors at movie theaters because it was fun.